Zener diodes are also a type of diode. When working normally, Zener diodes operate in the reverse breakdown region, where the current changes greatly while the voltage changes very little, thus achieving a voltage stabilization effect.
Categories：Product knowledge Date：2025-01-10 Hits：518 View »
Compared with parallel inverters, thyristor series inverters have more advantages:
Categories：Product knowledge Date：2025-01-09 Hits：461 View »
When a forward voltage is applied between the anode and cathode of a thyristor and no voltage is applied to the control electrode, the thyristor is in a forward blocking state.
Categories：Product knowledge Date：2025-01-09 Hits：520 View »
When the thyristor is damaged and needs to be inspected and analyzed for its cause, the core can be removed from the cooling jacket, the core box can be opened, and the chip can be removed to observe the traces after the damage to determine the cause.
Categories：Product knowledge Date：2025-01-09 Hits：652 View »
When the thyristor is damaged and needs to be inspected and analyzed for its cause, the core can be removed from the cooling jacket, the core box can be opened, and the chip can be removed to observe the traces after the damage to determine the cause.
Categories：Product knowledge Date：2025-01-09 Hits：539 View »
Medium frequency power supply is a device that converts three-phase power frequency (50Hz) AC power into single-phase medium frequency AC power.
Categories：Product knowledge Date：2025-01-08 Hits：472 View »
According to the installation method on the PCB board, there are two main types of MOS tube packaging: through hole and surface mount.
Categories：Product knowledge Date：2025-01-08 Hits：823 View »
What is the principle of fast recovery diode surge failure? What is the difference between avalanche failure and edge failure of fast recovery diodes?
Categories：Product knowledge Date：2025-01-08 Hits：512 View »
In today's semiconductor industry, heat dissipation can almost be said to be the most important aspect that cannot be ignored except for PPA (power consumption, performance, and area). Taking mobile SoC as an example, the problem of chip overheating and frequency reduction affects any smartphone on the market.
Categories：Product knowledge Date：2025-01-07 Hits：469 View »
The technical indicators used to indicate the performance and applicability of diodes are called diode parameters, and different types of diodes have different characteristic parameters.
Categories：Product knowledge Date：2025-01-07 Hits：640 View »
